Table of Contents
Advertisement
CLEANING, CARE
Checks and maintenance steps for winter operation
17.2
Info
If the motorcycle is used in the winter, salt can be expected on the roads. Precautions need to be taken against the aggressive road
salt.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water intensifies the effects of salt.
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride a short distance until the operating temperature is reached, apply-
ing the brakes as well.
The heat causes water to evaporate from inaccessible parts of the engine and
brakes.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. (
p. 168)
–
Treat bare metal (except for brake discs and the exhaust system) with an anticorrosive.
Cleaning and preserving materials for metal, rubber and plastic (
–
Treat all painted parts with a mild paint care product.
Paint cleaner and polish for high-gloss and matte finishes, bare metal and plastic
surfaces (
p. 271)
–
Oil the ignition/steering lock, tank lock, and seat lock.
Universal oil spray (
p. 271)
235
p. 270)
Advertisement
Table of Contents
