Face Detection Function Settings; User Switch Set Item - JVC GY-HC500E Instructions Manual

Face Detection Function Settings

Mode
For configuring the behavior when operating the
user button that is assigned with the "Face
Detection" function in the Auto Focus mode.
Select the control to track results of face detection.
AF&AE:
0
Sets auto focus and exposure control for the
face that is being tracked.
AF:
0
Sets auto focus for the face that is being tracked.
[Setting Values: RAF&AE, AF]
(A P62 [Adjusting the Focusing by Face
Detection] )
Memo :
When "AF&AE" is selected, this function will be
0
activated when the [FOCUS AUTO/MANU]
switch is set to "AUTO" and when at least one of
the Iris, Shutter and Gain items is configured to
Auto mode.
When "AF" is specified, this function will be
0
activated only when the [FOCUS AUTO/MANU]
switch is set to "AUTO".
Face Only AF
For activating auto focusing only for the face of the
subject.
[Setting Values: On, ROff]
Memo :
When a face cannot be detected when this is
0
configured to "On", the camera recorder
switches to manual focusing.
Sensitivity
For setting the level of ease of face detection.
[Setting Values: RHigh, Middle, Low]
Holding Duration
For specifying duration to maintain the current
focus when the camera loses track of the face.
Set to "Short" to select another object immediately
if the face on the screen is lost.
Set to "Long" to operate at the same position for
some time even if the face on the screen is lost.
[Setting Values: Long, RNormal, Short]
116
Camera Function Menu

User Switch Set Item

USER1 to USER9, USER10 ▲, USER11 ▼,
USER12 ◀, USER13 ▶
Assigning one of the functions in the following
menu to the [FOCUS ASSIST/1], [OIS/2],
[ONLINE/3], [AE LOCK/4], [ZEBRA/5], [MARKER/
6], [USER7], [USER8] or [EXP.FOCUS/9] button or
the [▲/10], [▼/11], [◀/12] or [▶/13] front cross-
shaped button enables operation of the said
preconfigured function (on/off, launching,
switching).
Set according to the shooting conditions. Usable in
the Camera mode.
(A P46 [Assignment of Functions to User
Buttons] )
[Setting Values: Cancel, Menu, Slot Select, Return
Video, Return over IP, Auto Upload, Cropping
Position, Live Streaming, Load Picture File, Clip
Review, OK Mark, Clip Cutter Trig, Backup Trig,
Rec, LCD Backlight, Spot Meter, Focus Assist,
Expanded Focus, Focus Assist +, Marker,
Histogram, Zebra, AWB, White Balance, Preset
Zoom3, Preset Zoom2, Preset Zoom1, Digital
Extender, OIS, Infrared, Black Compress, Black
Stretch, Face Only AF, Face Detection, AE Lock,
Lolux, Bars, None]
Memo :
"Cancel" and "Menu" can only be assigned to
0
[USER7] or [USER8].
"Rec" cannot be assigned to [FOCUS
0
ASSIST/1], [OIS/2] and [ONLINE/3].
"Focus Assist +" is a combination of the "Focus
0
Assist" and "Expanded Focus" functions.
The following functions can be assigned only for
0
GY-HC500SPCU.
[ODK Tagging]OFF, [ODK Tagging]DEF, [ODK
Tagging]KO, [ODK Tagging]KOR, [ODK
Tagging]P, [ODK Tagging]PR, [ODK
Tagging]FG, [ODK Tagging]FGB, [ODK
Tagging]REMOVE, Score Overlay