Adjusting The Brightness - JVC GY-HM190AG Instructions Manual

4k memory card camera recorder
Table of Contents

Advertisement

Selecting Specific Person from Several
Persons
1 Hold down the user button that is assigned
with "Face Detect".
The camera recorder will enter face selection
0
mode and the face detection icon (q) will
blink.
An orange frame will appear on the face of
0
the person nearest to the center of the
screen. Blue frames will appear on the faces
of others.
Detection Frame (Orange)
Detection Frame (Blue)
.
2 Select a specific person.
Use the cross-shaped button (HIJK) to
0
select a person.
An orange frame will appear on the face of
0
the selected person and focus will be
automatically adjusted.
Detection Frame (Orange)
Detection Frame (Blue)
.
3 Press the Set button (R) to confirm the
person for face detection.
Memo :
Press the [CANCEL/STOP] button to cancel the
0
selection.
You can specify the detection sensitivity and the
0
operation speed after losing sight of the face
using [Main Menu] B [Camera Function] B
[User Switch Set] B [Face Detect] B [Sensitivity]
and [Hysteresis].
(A P92 [ Sensitivity ] )
(A P92 [ Hysteresis ] )
48
Adjusting the Focusing by Face Detection

Adjusting the Brightness

Adjust the brightness using Iris, Gain, Shutter
speed and ND filter according to the brightness of
the object.
Adjusting the Brightness Automatically:
Automatic Brightness Adjustment (AE)
Mode
Iris, Gain, Shutter speed and ND filter are
automatically adjusted according to the brightness
of the object to maintain optimum brightness.
Blinking
.
To set only the Gain, Iris and Shutter to Auto mode,
press and hold the [FULL AUTO] button and set the
Full Auto mode to off before setting each item to the
automatic adjustment mode.
1 Set Gain, Iris and Shutter to Auto mode.
[Adjusting the Iris] (A P 49)
0
[Setting the Gain] (A P 51)
0
[Setting the Electronic Shutter] (A P 52)
0
2 Set the target level (brighter/darker) to
maintain optimum brightness during
automatic adjustment.
When "AE±*" (* denotes number) appears on
0
the screen, press the [AE LEVEL] button on
the side of the camera recorder to display "AE
±*" against a white background and set using
the J / K volume buttons.
4030 20
10
.
00: 00: 00.00
Jan 24, 2015
12 :34 : 56
ND 1 /16
0
P
15000K
AE
6
+

Advertisement

Table of Contents
loading

Table of Contents