Detergent And Rinse Aid - Meiko M-iClean U Series Operating Instructions Manual

Key/symbol
8.2

Detergent and rinse aid

MEIKO recommends brand cleaning products from leading manufacturers.
Cleaning and hygiene products from
Chemical product settings
The required detergent and rinse aid are dispensed from storage containers into the
tank or boiler by electronically controlled dosing equipment. Dosing occurs automati-
cally based on the requirements for the washing process.
The correct settings for the quantity of detergent and rinse aid depend on the prod-
uct used. The relevant chemical supplier can install the correct setting.
Recommendations:
– The pH value of the detergent should be greater than 7.
– The pH value of the rinse aid should be between 7 and 2.
Change of products
Change of product means that one rinse aid or detergent is replaced by another. If
these different products are mixed, it can lead to unwanted occurrences, such as
precipitations.
•
Before using new products, thoroughly rinse the hoses and dosing units with
warm water.
Meaning
Programme: cutlery
Programme: cups
Programme: dishes
Programme: pans
Programme: glasses - gentle
Programme: glasses - normal
Programme: glasses - intensive
Programme: glasses - gentle + cold water rinse
Programme: glasses - normal + cold water rinse
29 / 64
make an excellent choice.
9763258