Video Off Method - DFI 586STE User Manual

PM Control by APM
Yes An Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU' s
internal clock. (default)
N o
The system BIOS will ignore APM when initiating the Power
Management mode.
Video Off Option
Always On
Suspend -> Off
Susp, Stby -> Off
All Modes -> Off

Video Off Method

This determines the manner in which the monitor is blanked.
V/H This selection will cause the system to turn off the vertical and
SYNC + horizontal synchronization ports and write blanks to the video
Blank buffer.
Blank This option only writes blanks to the video buffer.
Screen
DPMS Initializes display power management signaling.
MODEM Use IRQ
This category is used to set an IRQ channel (IRQ 3, 4, 5, 7, 9, 10 or
11) for the modem installed in your system.
PM Timers
These Green PC power saving categories are user configurable only
when the Power Management category is set to User Defined.
42
The system BIOS will never turn off the screen.
The screen is off when the system is in the Suspend
mode.
The screen is off when the system is in the Standby
or Suspend mode.
The screen is off when the system is in the Doze,
Standby or Suspend mode.