Table of Contents
Advertisement
Setup Procedure
X
Step 3: Create a RAID Volume
1. When the Intel
RST option ROM status screen displays during POST, press <Ctrl> and
®
<I> simultaneously to enter the option ROM user interface.
2. Select 1: Create RAID Volume and press <Enter>.
3. Create a volume name and press <Enter>.
4. Use the up or down arrow keys to select the RAID level and press <Enter>.
5. Use the up or down arrow keys to select the strip size and press <Enter>.
6. Select the capacity and press <Enter>. You must select less than one hundred percent
of the available volume space to leave space for the second volume.
7. Press <Enter> to create the volume.
8. At the prompt, press <Y> to confirm volume creation.
9. Select 4: Exit and press <Enter>.
10. Press <Y> to confirm exit.
User's Manual | ICX610-C621A
Setup Procedure
X
Step 3-1: Create a RAID Volume in UEFI Mode
If the boot type is set to UEFI, RAID volume creation will be different. Please use the following
steps to create RAID volumes. To set the boot type, enter the Insyde BIOS and go to "Boot" >
"Boot Type".
1. Go to the "Advanced" menu in the Insyde BIOS and select "UEFI Device Manager".
InsydeH2O Setup Utility
Main
Advanced
Security
Boot
Exit
ACPI Configuration
X
CPU Configuration
X
Video Configuration
X
SATA Configuration
X
USB Configuration
X
PCI Express Configuration
X
Debug Configuration
X
UEFI Device Manager
X
SIO NCT6112D
X
SIO AST2500
X
H2O IPMI Configuration
X
Console Redirection
X
F1
Help
↑ /↓
Select Item
Esc
Exit
←/→
Select Item
2. The screen displays all available drives. Select "Create RAID volume" to create a RAID
volume.
3. Use the up or down arrow keys to select the RAID level and press <Enter>.
4. Use the up or down arrow keys to scroll through the list of hard drives and press <En-
ter> to select the drive.
5. Press <Enter>.
6. Use the up or down arrow keys to select the strip size and press <Enter>.
7. Enter the volume size and press <Enter>.
8. At the prompt, press <Y> to confirm volume creation.
Chapter 5
RAID
Rev. 5.0
ACPI Configuration Setting
F5/F6
Change Values
F9
Setup Defaults
Enter
Select
SubMenu
F10
Save and Exit
X
47
Advertisement
Table of Contents
