Service Level - Windhager LogWIN Operating Manual

2. Operation

2.6.2 Service level

In der Serviceebene können Messwerte, Parameter, Akto-
rentest und Einstellungen angezeigt, geändert bzw. durch-
geführt werden.
Information!
Changes on the Service level may be perfor-
med only by trained service personnel (direc-
tions for setting, see the LogWIN assembly in-
structions)
The menu item or sub-menu item is exited by pressing the
Back button (Fig. 48) or after a delay of 45 seconds.
1 only displayed when an MESplus control is present and this has been adjusted by a trained service technician in the basic settings.
Operator level
Service level
Information level
MES Module
Fig. 46
Service level only for trained
service personnel
Fig. 47
Values
Parameters
Actuator test
Settings
Fig. 48
19
1
Choose Back
5sec
Choose Back