Bottom Accumulator Temperature; Flue Gas Temperature; Operating Hours; Number Of Start - Windhager LogWIN Operating Manual

2. Operation

2.5.3 Bottom accumulator temperature

The bottom accumulator temperature is only displayed in combination with an
accumulator tank and the MESplus thermal distribution module WVF+ with
connected sensor.

2.5.4 Flue gas temperature

The current flue gas temperature in the flue outlet is displayed.
Information!
The flue gas temperature is measured directly on the flue outlet.
It may therefore deviate from a standard measurement.

2.5.5 Operating hours

The total number of boiler operation hours is displayed.
The operating hours are used in determining cleaning intervals and mainte-
nance work (see section 3.).

2.5.6 Number of start

The number of start is displayed

2.5.7 Display module software version

The current software version of the InfoWINplus (display module and opera-
ting unit)
is displayed.

2.5.8 Firing automate software version

The current software version of the firing automate (main PCB) is displayed.

2.5.9 Boiler model

The boiler model of the LogWIN is displayed
14
Accumulator-temp. bottom
50
Back
Fig. 28
Flue gas temperature
148
Back
Fig. 29
Operating hours
135
Back
Fig. 30
Number of start
75
Back
Fig. 31
Software version display module
LW 2
Back
Fig. 32
Software version
firing automate
Back
Fig. 33
Boiler model
Wood gasification
Back
Fig. 34
°C
°C
h
2.10
5.10
180