Operator Level - Windhager LogWIN Operating Manual

2. Operation

2.6.1 Operator level

Pressing the Menu button shows the „Operator level",
„Service level", „Information level" and „MES Module
the display – Fig. 39.
The arrow buttons select the "Operator level"; the Choose
button confirms the choice – Fig. 40.
2.6.1.1 Setting the time
This time is used for the time control of the automatic igni-
tion (accessory).
If the LogWIN is operated with an MESplus control, the time
is automatically adopted from the module and the time set
here is overwritten.
Confirm the selected "Time" sub-menu by pressing the
Choose button – Fig. 41.
Use the + or – button to set the required time – Fig. 42.
1 only displayed when an MESplus control is present and this has been adjusted by a trained service technician in the basic settings.
Boiler temperature
1
" in
(Operating phases)
Info
Fig. 39
Operator level
Service level
Information level
MES Module
Fig. 40
Time
Fig. 41
Time
Fig. 42
17
42
Menu
1
Choose Back
Choose Back
13:50
– Save Back
°C
+