Reassembling The 1555 - Intermec Sabre 1555 RFID Service Manual

Sabre 1555 RFID and Bar Code Reader Service Manual

Reassembling the 1555

If you opened the case to replace parts in the 1555, follow these procedures to
reassemble the 1555 and close the case.
You need this tool:
•
To reassemble the 1555
1. Route the flex cables as shown in the next illustration.
2. Position the upper case assembly next to the lower shell and handle.
2-30
Torque driver with a Torx bit
2.4 GHz
10-pin
915 MHz
12-pin
8-pin
Route all
flex cables
to this side