Table of Contents
Advertisement
Figure 4-12: USB Connector
4.8.6 VGA Monitor Connection
The KINO-DQM871 has a single female D-sub 15 connector on the external peripheral
interface panel. The D-sub 15 connector is connected to a CRT or VGA monitor. To
connect a monitor to the KINO-DQM871, please follow the instructions below.
Step 1:
Locate the female D-sub 15 connector. The location of the female D-sub 15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male D-sub 15 connector on the VGA
screen cable with the female D-sub 15 connector on the external peripheral
interface.
Step 3:
Insert the VGA
insert the male connector from the VGA screen into the female connector on the
KINO-DQM871. See Figure 4-13.
Page 72
KINO-DQM871 Mini-ITX SBC
connector.
Once the connectors are properly aligned with the
Advertisement
Table of Contents
