Internal Peripheral Connectors; Atx Power Signal Connector; Figure 3-2: Atx Power Signal Connector Location; Table 3-3: Atx Power Signal Connector Pinouts - IEI Technology KINO-DQM871 User Manual

KINO-DQM871 Mini-ITX SBC

3.2 Internal Peripheral Connectors

Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the KINO-DQM871.

3.2.1 ATX Power Signal Connector

CN Label:
CN Type:
CN Location:
CN Pinouts:
This connector provides power-on signal for ATX power mode. Users can use the
power-on signal to work with devices that need to receive the PS_ON signal in ATX mode.

Figure 3-2: ATX Power Signal Connector Location

Pin Description
5VSB
1
EC_PSON#
2
GND
3

Table 3-3: ATX Power Signal Connector Pinouts

PS_ON1
3-pin header
See Figure 3-2
See Table 3-3
Page 19