Clear Cmos; Figure 4-3: At/Atx Mode Selection Jumper Location - IEI Technology KINO-DQM871 User Manual

Figure 4-3: AT/ATX Mode Selection Jumper Location

4.5.2 Clear CMOS

Jumper Label:
Jumper Type:
Jumper Location:
If the KINO-DQM871 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for three seconds, then restart the system.
If the "CMOS Settings Wrong" message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Page 62
KINO-DQM871 Mini-ITX SBC
J_CMOS1
Push button
See Figure 4-4