Feature Codes - Avaya 1400 Series User Manual

1.5 Feature Codes

The following feature codes can be dialed from most phones after pressing Feature. Most of these features can also be
assigned to programmable buttons.
Feature
Do Not Disturb
38
" Cancel
38
Recall
Save Number Redial
Last Number Redial
18
Conference Drop
27
Privacy
29
Call Forward
33
Call Forward Cancel
33
Account Code Entry
37
Voice Mailbox
Transfer
26
VMS Cover
46
Caller ID Name
Display
Caller ID Inspect
Call Coverage
34
Station Lock
36
Station Unlock
36
Caller ID Log
Hot Dial
Absent Message
32
Contact Closure 1
Contact Closure 2
System Release
System IP Address
IP Office Essential Edition - PARTNER Version 1400 Series Phone User Guide
IP Office Essential Edition
Code Description
01 This function allows you to switch do not disturb on or off.
01
03 This function allows you to send a recall or hook flash signal.
04 This function allows you to save the number dialed during a call and to redial that
number when idle. This can be used when the number dialed does not answer.
05 This function allows you to redial the last external number dialed.
06 This function allows you to select and drop a call from a conference.
07 This function allows you to turn privacy on or off. When on, other extensions are not
able to bridge into your calls.
11 This function allows you to redirect all your calls to another number. If the system
administrator has configured your for Remote Call Forwarding, you can forward calls
11
externally by specifying a personal speed dial as the destination.
12 This function allows you to enter an account code prior to making a call or during a
call.
14 This function allows you to transfer your current call to another extension's mailbox.
Your current call is put on hold and you enter the target extension number to indicate
the mailbox required.
15 This function allows the you to switch use of voicemail coverage for your extension on
or off.
16 This function allows you to swap the display of caller ID name and number information
on the phone.
17 This function allows you to see the caller ID of a call on another line without
interrupting the current call to which you are connected.
20 This function allows you to switch call coverage on or off. When on, any calls to you
that ring unanswered also start ringing at your call coverage extension.
21 This function allows you to lock and unlock your extension from being used to make
calls. When selected, you are prompted to enter a four digit code after which the
extension is locked. If the extension is already locked, use of this function prompts for
reentry of the four digit code to unlock the extension.
22 This function can only be used by the first two extensions in the system. It allows the
user to unlock any extension without needing to know the code that was used to lock
that extension.
23 This function allows you to view the phone system's call log of all caller IDs of calls
received by the system. To use this you must be one of the three extensions
configured for call ID logging by your system administrator.
26 This function allows you to dial a stored number without first going off hook or
pressing the SPEAKER button.
28 This function allows you to set or clear an absent message for display on you phone.
When set, the absent message is also displayed on other extensions when they call
the user.
41 This function you to operate the system's contact closure 1 or 2 connection. To use
this you must be a member of the system's contact closure group.
42
590 Displays the core software level that the system is running.
591 Displays the IP address of the systems LAN port.
Page 12
- Issue 5a (25 October 2011)