Avaya 1400 Series User Manual page 35

To Create a Call Coverage Button (Not 1403)
1. At the extension press Admin.
2. Use the up or down
3. Press the programmable button you want to change. Alternatively:
· Use the up or down
· At the Button: prompt press the button to edit or enter from the button number.
4. The current setting of that button is displayed.
5. Press Program and either dial #20 or use the
Coverage and press Select.
6. At the Call Coverage Orig: prompt enter the extension number for which the button is being programmed.
7. At the Call Coverage Dest: prompt enter the destination extension number for the call coverage calls.
8. The current setting of the button will now be set to Call Coverage O <covered extension> D <destination
extension>.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
To Use a Call Coverage Button
1. Press the programmed button. When on, if programmed on a button with a light, the light will be on.
IP Office Essential Edition - PARTNER Version 1400 Series Phone User Guide
IP Office Essential Edition
arrows to scroll to Telephone Programming. Press Select.
arrows to scroll to Button Programming. Press Select.
up or down
Other Features: Call Coverage
arrow buttons to scroll the display to Call
Page 35
- Issue 5a (25 October 2011)