Recording Good Shot Markers - Sony MSW-900P Operation Manual

3-2-3 Recording Good Shot Markers

Good shot markers 1 and 2 are recorded to tape when the RET button on
the lens is pressed during recording.
Recording shot markers
images and sounds enables quick access to the marked points. This
increases editing efficiency.
For detailed information on shot marker operations, refer to the manual supplied
with your VTR.
A setting on the VTR MODE 5 page of the MAINTENANCE menu
determines whether or not good shot markers are recorded. Factory
settings allow the recording of shot makers 1 and 2.
To record a shot marker 1
Press the RET button once. On the viewfinder screen, "z" and the time
code of the marked point are displayed for about 3 seconds.
To record a shot marker 2
Press the RET button twice. On the viewfinder screen, "X" and the time
code of the marked point are displayed for about 3 seconds.
....................................................................................................................................
1) Shot marker
Time code of the scene to be used as the editing point when editing.
1)
1 and 2 for scenes containing important
Chapter 3 Recording and Playback
3
3-15