Remote Device; Upnp; Built-In Switch Setup - Eclipse Security ECL-NVR16 User Manual

Display
Channel name
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!

5.6.11 Remote Device

Important
Do not connect the switch to the PoE port, otherwise the connection may fail!

5.6.11.1 UPNP

Please connect the IPC to the PoE port of the device rear panel (Figure 5-74), system can auto
connect to the network camera. Please note the following figure is for reference only.

5.6.11.2 Built-in Switch Setup

The built-in switch function is for product of PoE port.
From Network->Network Server->Switch, you can set switch IP address, subnet mask, gateway
and etc. See Figure 5-75.
5.6.11.3 Remote Device
In the main menu, click the Remote Device icon to go to the corresponding interface. See Figure
5-76.
to select the corresponding function.
Figure 5-74
Figure 5-75
119