Record; Account - Eclipse Security ECL-NVR16 User Manual

Please refer to the following sheet for detailed information.
Parameter
Alarm output
Trigger
Refresh

7.4.3.4 Record

Record control interface is shown as in Figure 7-49.
The bit stream type includes main stream and extra stream.
Please refer to the following sheet for detailed information.
Parameter
Schedule
Manual
Stop

7.4.3.5 Account

Here you can add, remove user or modify password. See Figure 7-50.
Function
The alarm output channel may vary. The interface here is for
reference only.
Please click the corresponding number and then click the trigger
button.
Enable/disable alarm output.
Please note once you activate an alarm manually, you need to
click the output channel number again and then click trigger button
to disable it. Otherwise the alarm can not be cancelled.
Search alarm output status.
Figure 7-49 Record
Function
System enables auto record function as you set in schedule setup
(chapter 7.3.2.2).
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
record setup.
173