Rs232 - Eclipse Security ECL-NVR16 User Manual

Parameter Function
Pre-record Please input pre-record value here.
When alarm record or motion detection record occurs, system can
record the several seconds video before activating the record
operation into the file. (Depends on data size).
Setup In Figure 7-24, click set button, you can go to the corresponding
setup interface. See Figure 7-25.
Please set schedule period and then select corresponding record
type: schedule, motion detection, and alarm.
Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the whole
week.)
After complete setup, please go back to Figure 7-24 and then click
save to save current time period setup.
Holiday Click Set button, system pops up a dialogue box shown as in Figure
7-27.
Here you can set holiday date. Check the box, it means current chann
shall record as your holiday setup. Please go to the Period interface
set the holiday date record setup.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in Figure 7-26.

7.4.2.4 RS232

The RS232 interface is shown as in Figure 7-28.
Please refer to the following sheet for detailed information.
Figure 7-28 RS232
156