Here you can realize network time synchronization. Please enable current function and then input
server IP, port number, time zone and time.
Please refer to the following sheet for detailed information.
Parameter
Enable
Server IP
Port
Time Zone
Update Interval
Alarm Centre
Alarm centre interface is shown as below. See Figure 7-36.
Please input alarm centre server IP, port number. Once there is an alarm occurred, system can
notify the alarm centre as you specified here.
Figure 7-35 NTP
Function
Enable NTP function or not.
Server IP address
Server port. System supports TCP only and default port value
is 123.
Device current time zone.
Time update interval value.
163