System Menu; Monitor Window Switch; Ptz Control - Eclipse Security ECL-NVR16 User Manual

Change show
mode
Local record
Snapshot
Audio
Close video

7.2.2 System Menu

System menu is shown as in Figure 7-8.
Please refer to chapter 7.4 Configuration, chapter 7.5 Search, chapter 7.6 Alarm, chapter 7.7
About, chapter 7.8 Log out for detailed information.

7.2.3 Monitor Window Switch

The monitor window switch interface is shown as in Figure 7-9.
System supports 1/4/6/8/9/13/16/20/25/36-window real-time preview.
----It is video quality adjustment button. It has relationship with decode via software.
--Fluency button. You can use this function to adjust the priority between real-time and
fluency.

7.2.4 PTZ Control

Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to
chapter 7.4.2.2 PTZ).
Here you can view direction keys, speed, zoom, focus, iris, preset, tour, pan, scan, pattern, aux
close, and PTZ setup button.
Please note: open menu/close menu/up/down/left/right/confirm/cancel buttons are for speed
dome only.
PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.
Speed: The step 8 speed is faster than step 1.
Resize or switch to full screen mode.
When you click local record button, the system begins
recording. The recorded file is saved to system folder: \
RecordDownload(default).
You can snapshoot important video. All images are
memorized in system folder: \ picture download (default).
Turn on or off audio.
Close video in current window.
Figure 7-8 System Menu
Figure 7-9 Monitor Window Switch
144