Network - Eclipse Security ECL-NVR16 User Manual

16ch nvr’s
Table of Contents

Advertisement

Parameter
RS232
Function
Data Bit
Stop Bit
Baud Bit
Parity

7.4.2.5 Network

Network interface is shown as in Figure 7-29.
Please refer to the following sheet for detailed information.
Parameter
IP Version
Function
There is only one option COM 01, corresponding to RS232.
Console is for debug.
Control keyboard: Switch between RS232 and control
keyboard.
Network keyboard: COM control protocol. You can use
network keyboard to control NVR via COM.
Transparent COM: Network user can communicate with
RS232 COM device.
PTZ matrix: PTZ matrix protocol. You can use the device to
control the PTZ matrix.
The value ranges from 5 to 8.
There are three options: 1/2.
You can select corresponding baud bit here.
There are five options: none/odd /even/mark/space.
Figure 7-29 Network
Function
There are two options: IPv4 and IPv6. Right now, syste
supports these two IP address format and you can access v
them.
157

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecl-nvr16m

Table of Contents