Wan Login - Eclipse Security ECL-NVR16 User Manual

Reset Restore system default value.
Click more button, the interface is shown as in Figure 7-13.
Please refer to the following sheet for detailed information.
Parameter
More Picture
Path
Record
Path
Reboot

7.3 WAN Login

In WAN mode, after you logged in, the interface is shown as below. See Figure 7-14.
It is to adjust monitor video contrast
ness.
It is to adjust monitor video
saturation.
It is to adjust monitor video hue.
Figure 7-13 Color and More
Function
Click picture path button, system pops up an interface for you
to modify path.
Click record path button, system pops up an interface for you
to modify path.
Click this button to reboot device.
If there is local use logged in the system menu, or the Web
logged in user has no right to reboot the device system pops
up a dialogue box to alert you.
All the operation
applies to WEB end only.
here
147