Eclipse Security ECL-NVR16 User Manual page 125

Please refer to the following sheet for detailed information.
Parameter Function
Event type: There are four types. Local input/network input/IPC
Event
Type
external/IPC offline alarm.
Alarm in Select corresponding alarm channel.
Enable You need to draw a circle here so that system can detect the alarm
signal.
Figure 7-40 PTZ Setup
Figure 7-41
Local input alarm: The alarm signal system detects from the
alarm input port.
Network input alarm: It is the alarm signal from the network.
IPC external alarm: It is the on-off alarm signal from the
front-end device and can activate the local NVR.
IPC offline alarm: Once you select this item, system can
generate an alarm when the front-end IPC disconnects with
the local NVR.
166