Encode - Eclipse Security ECL-NVR16 User Manual

Data
Separator
Time
Format
DST
Language
HDD Full
Pack
Duration
Device No
Video
Standard

7.4.2.2 Encode

The encode interface is shown as in Figure 7-23.
Please refer to the following sheet for detailed information.
Parameter Function
Channel Select the corresponding channel.
Channel
Display the current channel ID. You can also modify the channel ID here.
Name
Encoding
The device does not support it.
mode
Please select separator such as – or /.
There are two options: 24-H and 12-H.
Here you can set day night save time begin time and end time. See
Figure 7-21and Figure 7-22.
Here you can view the system current language. You can select from
the dropdown list.
There are two options: stop recording or overwrite the previous files
when HDD is full.
Here you can select file size. The value ranges from 1 to 120
(minute). Default setup is 60 minutes.
When you are using one remote control to manage multiple devices,
you can give a serial numbers to the device.
Please note current series product does not support this function.
Here you can view video format such as PAL.
Figure 7-23 Encode
153