Search; Manual Record; Alarm Output; Remote Device - Eclipse Security Tribrid User Manual

Item
Color mode
EQ
Position

4.4.5 Search

Please refer to chapter 4.8.1 for detailed information.

4.4.6 Manual Record

Please refer to chapter 4.10.4.3.1 for detailed information.

4.4.7 Alarm Output

Please refer to chapter 4.10.3.4 for detailed information.

4.4.8 Remote Device

Please note it is for digital channel only.
Please refer to chapter 4.10.1.1 for detailed information.

4.4.9 Video Matrix

Please refer to chapter 4.10.5.3 for detailed information.

4.4.10 Main menu

Please refer to chapter 4.7 for detailed information.

4.5 Navigation Bar

You need to go to the Main menu->Setting->System->General to enable navigation
bar function; otherwise you can not see the following interface.
The navigation bar is shown as below. See Figure 4-23.
HDCVI Standalone DVR User's Manual
Note
the video brightness if the value is high. But the video
noise may become too clear.
It includes several modes such as standard, color, bright,
gentle. Select a color mode, the sharpness, brightness,
contrast and etc
corresponding setup.
Click reset button, device can automatically adjust to the
best display effect.
Note:
This function is for analog channel only.
It is to adjust the image position on the screen. The
digital stands for the pixel. The default pixel is 16.
Note:
This function is for analog channel only.
can automatically switch to
67