Network - Eclipse Security Nubix User Manual

CH 3 How to Use

3-3-6. NETWORK

This is IP address setting when DVR is connected to LAN.
Input IP Address, Subnet Mask and Gateway you want to input and then save them
by pressing ENTER Button. (If you connected PC and DVR on 1:1, Subnet Mask
and Gateway value of PC and DVR should be set to be same.)
1) DHCP (Dynamic Host Configuration Protocol)
Set whether you want to use DHCP or not (On/Off)
If you connect LAN after setting it to On, IP is allocated automatically. If you set it
to Off, you have to input IP. DHCP is a protocol that allows managers to manage and
allocate IP address centrally.
2) Port
There are 4 kinds of ports for the case such as watch, search, setup and web. You can
individually set the port number of the DVR. The default is 8000. You can choose
from 8000 to 9999.
3) DDNS (Dynamic Domain Name Server)
This is the function to automatically change the IP of DVR to URL. This product
supports the DDNS service of www.dyndns.com So if you want to use this function,
you join www.dyndns.com at first and get the URL.
53