lancer Flavor Select 30 Installation And Service Manual page 15

1.10 INSTALLING THE FS30 DISPENSER, CONTINUED
I. Install the cup rest and splash plate.
J. Connect the power cord to a grounded electrical outlet.
! AGITATION WARNING
THE BIN AGITATION SYSTEM WILL OPERATE AUTOMATICALLY. DO NOT PLACE HANDS IN THE
BIN OR THE ICE CHUTE.
! ADVERTENCIA AGITACIÓN
LA BANDEJA O LA CASCADA DE HIELO.
! AGITATION AVERTISSEMENT
LES MAINS DANS LE BAC OU LA GOULOTTE DE GLACE.
K. Test motor operation by pushing the ice chute.
L. Clean and sanitize the dispenser (Section 2).
M. Fill the dispenser half full with ice. Test ice delivery by pushing the ice chute.
N. Fill the dispenser with ice.
O. Install the top cover.
P. Set the brix ratio for beverage dispensing valves according to the manufacturer's instructions.
Water Inlets
EL SISTEMA FUNCIONARÁ AUTOMÁTICAMENTE BIN AGITACIÓN. NO DA PARA ARRIBA EN
LE SYSTÈME FONCTIONNERA AUTOMATIQUEMENT BIN AGITATION. NE PAS METTRE
FIGURE 8
Syrup Connections
15
Installation and Operation Manual PN 28-0580/03
Flavor Injection Inlets
CO2 Inlet