Copy/Print On Tabs; Copy Job With Tabs - Xerox 4110 Getting Started
Xerox copier/printer getting started
Hide thumbs
Also See for 4110:
- User manual (520 pages) ,
- Configuration and setup (108 pages) ,
- System administration manual (92 pages)
Table of Contents
Advertisement
3. L o ad i ng Pa p er
Copy/print on tabs
Copy job with tabs
3- 1 4
9.
Select Save to return to the Paper Tray Attributes screen.
10.
Choose one of the following:
a. If you want to change the attributes for another tray, repeat
Step 2. - Step 9.
b. If you finished, repeatedly select Close until you return to
the All Services screen.
This section provides information on:
•
Programming features on the Printer UI for a copy job with
tabs, and
•
Programming features from the print driver for network print
jobs that require tabs.
1.
Load the tab stock in Tray 5 (Bypass).
2.
For Tray 5 (Bypass) program the following (from the Setup
Menu):
•
For Paper Size: Standard Size (8.5 x11 in./A4)
•
For Paper Type: Tab Stock 1
•
Select Save/Close/Exit until you return to the All
Services screen
3.
Select Copy from the All Services screen.
4.
Select the desired Copy feature.
5.
Select Output Format.
6.
For Output Orientation, select Face Down.
7.
Select Save.
8.
From Output Format, select Tab Margin Shift and Copy to
Tab.
9.
Select Save.
10.
Enter the desired output quantity.
11.
Select Start.
X e r o x 4 59 0 /4 11 0 Co p ie r / Pr in t er G et ti n g Sta r te d
Advertisement
Table of Contents
