4.17 T2100CT FL Inverter Board
Removing the T2100CT FL Inverter Board
To remove the T2100CT's FL inverter board, follow the steps below and refer to Figure 4-30.
1.
Turn off the power to the computer, then disconnect the AC power cord and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, optional PCMCIA card, and
display mask as described in Sections 4.2, 4.3, 4.4, and 4.11.
3.
Remove the two M2.5x6 screws securing the FL inverter board.
4.
Rotate the FL inverter board out of its seating and disconnect the FL inverter
cable from CN1 and the FL cable from CN2 on the FL inverter board.
Figure 4-30 Disconnecting the FL inverter board
4-42
T2100 Series