Toshiba T2100 Series Maintenance Manual page 143

Installing the Display Mask
To install the display mask, follow the steps below and refer to Figure 4-21.
1. Insert the LCD latch into the LCD cover.
2. Set the display mask in place and secure the latches beginning with the display
support (Figure 4-21).
3. Continue along the bottom of the display (three latches), along the sides (four
latches on each side) and across the top (six latches).
4. Secure the display mask with two M2.5x6 screws at the display hinges.
5. Attach the two rubber seals at each display hinge to cover the screws.
6. Install the LCD cushions in the upper corners of the mask.
7. Install the optional PCMCIA card, optional memory card and battery pack as
described in Sections 4.4, 4.3 and 4.2.
T2100 Series
4-29