5.
Disconnect the AccuPoint cable from PJ13 on the system board, then remove the
palm rest, the HDD cover and the palm rest support (Figure 4-13).
6.
Remove three M2.5x8 silver screws from the HDD bracket.
7.
Remove the HDD cover, palm rest cover-support, HDD bracket, and battery
holder assembly (Figure 4-13).
8.
Carefully slide the HDD to the left to disconnect it from the HDD connector
(Figure 4-13).
9.
Slide the HDD out of the system unit.
4-16
Figure 4-13 Removing the HDD
T2100 Series