4.6
Hard Disk Drive
Removing the Hard Disk Drive
To remove the hard disk drive, follow the steps below and refer to Figures 4-12 and 4-13.
1.
Turn off the power to the computer, then disconnect the AC power cord and all
external cables connected to the computer.
2.
Remove the battery pack, optional PCMCIA card, optional memory module and
keyboard as described in Sections 4.2 through 4.5.
3.
Turn the computer over and remove four pan-head M3x6 screws on the bottom
(Figure 4-12).
4.
Turn the computer back over and open the display.
T2100 Series
Figure 4-12 Removing the HDD screws
4-15