Toshiba T2100 Series Maintenance Manual page 149

Installing the FL
To install the T2100's FL, follow the steps below and refer to Figure 4-24.
1. Seat the FL on the LCD module and slip the edge of the FL cover under the metal
frame, aligning the holes in the cover with the corresponding holes in the display
assembly cover (Figure
2. Secure the FL cover with three flat-head M1.5x3 brass screws.
3. Secure the FL cable to the LCD panel with tape as indicated in Figure 4-24.
4. Install the LCD module, FL inverter, display mask, optional PCMCIA card, op-
tional memory card and battery pack as described in Sections 4.13, 4.12, 4.11,
4.4, 4.3 and 4.2.
T2100 Series
4-24).
4-35