If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
To make other changes, press N and repeat the steps above.
2.
3.
To accept the changes, press Y .
NOTE: You can press Esc to quit at any time without saving changes. TSETUP asks
you to confirm that you don't want to save your changes. When you access TSETUP,
the current configuration is displayed.
Factory Preset Configuration
To show the factory preset configuration, press Home .
1.
To accept the default settings, press End and then press Y .
2.
3.23.3
Setup Options
The SYSTEM SETUP screen is divided into functionally-related groups. This
section describes each group and its options.
NOTE: The functions described in this section can also be changed using Toshiba's
Hardware Setup program in Windows. You can access this program through the
Toshiba Utilities group in the Windows Program Manager.
1.
Memory
This group provides information on the computer's memory. The values displayed
cannot be changed.
(a)
Total
This field displays the total amount of memory installed and is automatically
calculated by the computer.
T2100 Series
3-53