Configure 802.1X Authenticator Parameter - D-Link xStack DGS-3426G User Manual

®
xStack DGS-3426G Layer 2 Gigabit Ethernet Managed Switch

Configure 802.1X Authenticator Parameter

This window is used to configure the 802.1X authenticator settings on the Switch. The user may toggle between switches in the
switch stack by using the Unit drop-down menu.
To view this window, click Security > 802.1X > Configure 802.1X Authenticator Parameter, as shown below:
Figure 6 - 20 Configure 802.1X Authenticator Parameter window
To configure the settings by port, click on its corresponding Modify button, which will display the following table to configure:
238