Ssh User Authentication Mode - D-Link xStack DGS-3426G User Manual

SSH User Authentication Mode

The following windows are used to configure parameters for users attempting to access the Switch through SSH.
To view this window, click Security > SSH > SSH User Authentication Mode, as shown below:
In the example screen above, the User Account "RG" has been previously set using the User Accounts window in the
Administration folder. A User Account must be set in order to set the parameters for the SSH user. To configure the parameters
for a SSH user, click on the hyperlinked User Name in the Current Accounts window, which will reveal the following window
to configure.
Figure 6 - 63 SSH User menu
Once a User Account has been configured, return to the SSH User Authentication window, which now displays the newly created
account, as shown here.
To configure the SSH settings for this user, click its hyperlinked User Name which will display the following window to
configure:
The user may set the following parameters:
®
xStack DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 62 Current Accounts window
Figure 6 - 64 SSH User Authentication Mode window
Figure 6 - 65 SSH User Authentication Mode – Edit window
276
NOTE: To set the SSH
User Authentication
parameters on the
Switch, a User
Account must be
previously configured.