Jwac User Account - D-Link xStack DGS-3426G User Manual

Idle Time
(1-1440 Minutes)
Block Time
(0-300 Seconds)
Click Apply to implement changes made.

JWAC User Account

This window is used to configure JWAC user accounts on the Switch.
To view this window, click Security > JWAC > JWAC User Account, as shown below:
To configure JWAC user settings, click the Add button, which will open the following window:
The following fields can be configured:
Parameter
User Name
VID(1-4094)
New Password
Confirm New
Password
Click Apply to implement changes made.
To view JWAC user settings for the Switch, click the Hyperlinked
window:
®
xStack DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
JWAC configuration window.
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
This parameter specifies the period of time a host will keep in a blocked state after it fails to
authenticate. Enter a value between 0 and 300 seconds. The default setting is 60 seconds.
Figure 6 - 73 JWAC User Accounts window
Figure 6 - 74 JWAC User Account Add Table window
Description
Enter a username of up to 15 alphanumeric characters.
Enter the VLAN ID of the Account you wish to create.
Enter the password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Retype the password entered in the previous field.
Show All JWAC User Account
286
Entries, to view the following