Table of Contents
Advertisement
The following parameters may be set:
Parameter
Unit
From/To
Authorized Mode
®
xStack
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 66 Multiple Authentication Settings window
Description
Choose the Unit ID of the switch in the switch stack you wish to configure.
Select a port or range of ports to be configured.
Use the drop down menu to select either Port Based or Host Based authorized mode.
Port Based – If one of the attached hosts passes the authentication process, all host on the
same port will be granted access to the network. If the user fails the authorization, this port will
278
Advertisement
Table of Contents
