xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
802.1x Auth Mode Settings
The following window is used to set the type of authentication mode used in employing the 802.1X security settings. Simply use
the pull down menu to select Port-based or MAC-based 802.1X and click the Apply button.
Figure 6- 95. 802.1X Auth Mode Settings window
802.1X Authenticator Settings
To configure the 802.1X authenticator settings, click Configuration > Port Access Entity > 802.1x Authenticator Settings:
Figure 6- 96. Configure 802.1X Authenticator Parameter window
To view the 802.1X authenticator settings on a different line card in the chassis, use the Unit pull-down menu to select that line
card by its ID number in the chassis. To configure the settings by port, click on the hyperlinked port number under the Port
heading, which will display the following table to configure:
116