Config 802.1X Capability Ports [<Portlist> | All] [Authenticator | None] - D-Link X-STACK DES-3200 SERIES Reference Manual

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
DES-3200-28P:admin#show 802.1x auth_configuration ports
Command: show 802.1x auth_configuration ports 1
Port Number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60
TxPeriod : 30
SuppTimeout : 30
ServerTimeout : 30
MaxReq : 2
ReAuthPeriod : 3600
ReAuthenticate : Disabled
Forward EAPOL PDU On Port : Enabled
Max User On Port : 16
CTRL+C ESC q Quit
4-11 config 802.1x capability
Description
This command is used to configure the port capability.
Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Parameters
ports - Specify a range of ports to be configured.
<portlist> - Enter the list of ports used for the configuration here.
all - Specify all ports to be configured.
authenticator - The port that wishes to enforce authentication before allowing access to services
that are accessible via that port adopts the authenticator role.
none - Disable authentication on the specified ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
sec
sec
sec
sec
times
sec
SPACE n Next Page p Previous Page r Refresh
43
1