Yealink SIP T2 Series Provisioning Manual page 98

Yealink IP Phones Auto Provisioning Guide
Parameter
voice.tone.stutter
voice.tone.autoanswer
features.normal_refuse_code
92
Permitted
Values
The default value is blank.
Note: It works only if the value of the parameter
"voice.tone.country" is set to Custom.
It customizes the tone when the IP phone receives
a voice mail.
The value format is Freq/Duration. For more
information on the value format, refer to the
String
parameter "voice.tone.dial".
The default value is blank.
Note: It works only if the value of the parameter
"voice.tone.country" is set to Custom.
It customizes the warning tone for auto answer.
The value format is Freq/Duration. For more
information on the value format, refer to the
parameter "voice.tone.dial".
String
The default value is blank.
Note: It works only if the value of the parameter
"voice.tone.country" is set to Custom.
It configures a return code and reason of SIP
404, 480, 486
response messages when the IP phone rejects an
or 603
incoming call. A specific reason is displayed on the
Descriptions
Settings->Tones-> Stutter
Settings->Tones->Auto Answer
Features->General
Information->Return Code When
Refuse
Web Setting Path