Yealink SIP T2 Series Provisioning Manual page 110

Yealink IP Phones Auto Provisioning Guide
Parameter
features.play_local_dtmf_tone_enable
features.location_info_indicator.enable
features.update_checking_time
104
Permitted
Values
1-Enabled
The default value is 0.
It enables or disables the IP phone to play a local
DTMF tone.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It enables or disables the idle screen to display the
notification "Location is not set" when the location
of the phone is not set.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It configures the interval (in hours) for the IP phone
to automatically check if there is a firmware
update available on Lync server.
Integer from 1
If it is set to 1 (1 hour), the IP phone will check if a
to 48
firmware update is available on the Lync server
every 1 hour. If there is an update available, the
phone will prompt for an update.
Descriptions
Features->General Information->Play
Local DTMF Tone
Features->General
Information->E911 Location Tip
Features->General
Information->Update Checking Time
Web Setting Path