Yealink SIP T2 Series Provisioning Manual page 78

Yealink IP Phones Auto Provisioning Guide
Parameter
network.qos.rtptos
network.qos.signaltos
phone_setting.rtcp_xr_report.enable
(only applicable to SIP-T48G IP phones )
network.802_1x.mode
72
Permitted
Values
The default value is 443.
It takes effect after a reboot.
It configures the DSCP (Differentiated Services
Code Point) for voice packets.
Integer from 0
The default DSCP value for RTP packets is 46
to 63
(Expedited Forwarding).
It takes effect after a reboot.
It configures the DSCP (Differentiated Services
Code Point) for SIP packets.
Integer from 0
The default DSCP value for SIP packets is 26
to 63
(Assured Forwarding).
It takes effect after a reboot.
It enables or disables
(every 5 seconds) send RTCP-XR packets to
another participating phone during a call for
0 or 1
call quality monitoring and diagnosing
The default value is 0.
It takes effect after a reboot.
It configures the 802.1x authentication method.
0, 1, 2, 3 or 4
0-Disabled
Descriptions
Network->Advanced->Voice
QoS->Voice QoS (0~63)
Network->Advanced->Voice
QoS->SIP QoS (0~63)
the IP phone to periodically
.
Network->Advanced->802.1x->802.1
x Mode
Web Setting Path