Yealink SIP T2 Series Provisioning Manual page 65

Parameter
network.pppoe.user
network.pppoe.password
network.ipv6_internet_port.type
Permitted
Values
It configures the user name for PPPoE connection.
Example:
network.pppoe.user = Xmyl0592123
The default value is blank.
String within
It takes effect after a reboot.
32 characters
Note: It works only if the value of the parameter
"network.ip_address_mode" is set to 0 (IPv4) or 2
(IPv4 & IPv6), and "network.internet_port.type" is
set to 1 (PPPoE).
It configures the password for PPPoE connection.
Example:
network.pppoe.password = yealink123
The default value is blank.
String within
It takes effect after a reboot.
99 characters
Note: It works only if the value of the parameter
"network.ip_address_mode" is set to 0 (IPv4) or 2
(IPv4 & IPv6), and "network.internet_port.type" is
set to 1 (PPPoE).
It configures the Internet (WAN) port type for IPv6.
0 or 1
0-DHCP
Descriptions
Network->Basic->IPv4 Config->
PPPoE->User Name
Network->Basic->IPv4 Config->
PPPoE->Password
Network->Basic->IPv6
Config->DHCP/Static IP Address
Appendix
Web Setting Path
59