Yealink SIP T2 Series Provisioning Manual page 11

Getting Started
The partial parameters in the Common CFG file are described as follows:
####################################################
## Common CFG File ##
####################################################
#!version:1.0.0.1
######################################################
## Hostname ##
######################################################
network.dhcp_host_name =
######################################################
## PPPoE ##
######################################################
network.pppoe.user =
network.pppoe.password =
######################################################
## Network Advanced ##
######################################################
##It enables or disables the PC port.0-Disabled, 1-Auto Negotiation.
##The default value is 1.It takes effect after a reboot.
network.pc_port.enable =
##The default value is 0.It takes effect after a reboot.
network.internet_port.speed_duplex =
network.pc_port.speed_duplex =
##It enables or disables the phone to use manually configured static IPv4 DNS when
Internet (WAN) port type for IPv4 is configured as DHCP .
##0-Disabled (use the IPv4 DNS obtained by DHCP), 1-Enabled
##The default value is 0.It takes effect after a reboot.
network.static_dns_enable =
network.ipv6_static_dns_enable =
MAC-Oriented CFG file contains configuration parameters which are expected to be
updated per phone, such as time.
5