Yealink SIP T2 Series Provisioning Manual page 83

Parameter
network.snmp.port
(only applicable to SIP-T48G IP phones)
network.snmp.trust_ip
(only applicable to SIP-T48G IP phones)
syslog.mode
Permitted
Values
It takes effect after a reboot.
It configures the port used for SNMP (Simple
Network Management Protocol) communication.
Integer from 1
to 65535 The default value is 161.
It takes effect after a reboot.
It configures the SNMP (Simple Network
Management Protocol) server addresses from
which GET requests will be accepted.
You can specify one or more addresses. Multiple
addresses are separated by space.
If the value is set to "0.0.0.0", the IP phone can
IP Address
accept and handle GET requests from any IP
address.
If the value is left blank, the IP phone cannot
receive or handle any GET request.
The default value is 0.0.0.0.
It takes effect after a reboot.
It configures the IP phone to export log files to the
0 or 1
local system or syslog server.
Descriptions
Network->Advanced->SNMP->Port
(1~65535)
Network->Advanced->SNMP->Turste
d Address
Settings->Configuration->Export
System Log
Appendix
Web Setting Path
77