Yealink IP Phones Auto Provisioning Guide
This section provides instructions on how to configure a DHCP server for Windows using
DHCP Turbo. You can download this software online:
http://www.tucows.com/preview/265297
Before configuring the DHCP Turbo, make sure:
The firewall on the PC is disabled.
There is no DHCP server in your local system.
To configure the DHCP Turbo:
1.
To start the DHCP Turbo application, double click localhost.
2.
Click the Login button (the login password is blank) to log in.
3.
Right click Scopes and select New Scope.
4.
Configure the DHCP server name, the DHCP IP range and the subnet mask.
46
and install it following the setup wizard.