Yealink SIP T2 Series Provisioning Manual page 100

Yealink IP Phones Auto Provisioning Guide
Parameter
features.call_num_filter
features.relog_offtime
94
Permitted
Values
It configures the characters the IP phone filters
when dialing.
If the dialed number contains configured
characters, the IP phone will automatically filter
these characters when dialing.
Example:
String within features.call_num_filter = ,(%!
99 characters
If you dial 1010%, the IP phone will filter the
character % and dial out 1010.
The default value is blank.
Note: If it is left blank, the IP phone will not
automatically filter any characters when dialing. If
you want to filter just a space, you have to set the
value to " ," (a space first followed by a comma).
It configures the timeout interval (in minutes) for
web access authentication.
Example:
Integer from 1
features.relog_offtime = 5
to 1000
If you log into the web user interface and leave it
for 5 minitues, it will automatically log out.
The default value is 5.
Descriptions
Features->General Information->Call
Number Filter
Features->General
Information->Auto-Logout
Time(1~1000min)
Web Setting Path