Yealink SIP T2 Series Provisioning Manual page 62

Yealink IP Phones Auto Provisioning Guide
Parameter
network.static_dns_enable
network.internet_port.ip
56
Permitted
Values
(IPv4 & IPv6).
It triggers the static DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the IP phone will use the IPv4
DNS obtained from DHCP .
0 or 1
If it is set to 1 (On), the IP phone will use manually
configured static IPv4 DNS.
The default value is 0.
It takes effect after a reboot.
Note: It works only if the value of the parameter
"network.internet_port.type" is set to 0 (DHCP).
It configures the IPv4 address.
Example:
network.internet_port.ip = 192.168.1.20
The default value is blank.
IPv4 address
It takes effect after a reboot.
Note: It works only if the value of the parameter
"network.ip_address_mode" is set to 0 (IPv4) or 2
(IPv4 & IPv6), and "network.internet_port.type" is
Descriptions
Network->Basic->IPv4 Config->Static
DNS
Network->Basic->IPv4 Config->Static
IP Address->IP Address
Web Setting Path